New Male Specific Markers for Hop and Application in Breeding Program.

Male specific DNA sequences were selected from a Diversity Arrays Technology (DArT) mapping study to evaluate their suitability for determination of the sex phenotype among young seedlings in a hop (Humulus lupulus L.) breeding program. Ten male specific DArT markers showed complete linkage with male sex phenotype in three crossing families. Following optimization, four were successfully converted into PCR markers and a multiplex PCR approach for their use was developed. Among 197 plants (97 from the world collection; 100 from three segregating families), 94-100% positive correlation with sex phenotypic data was achieved for the single PCR amplification, whereas the multiplex approach showed 100% correlation. To develop a fast and low-cost method, crude sample multiplex PCR was evaluated in 253 progenies from 14 segregating populations without losing accuracy. The study describes, for the first time, the routine application of molecular markers linked to male sex in an intensive Slovenian hop breeding program. The methods described could be employed for screening of sex at the seedling stage in other hop programs worldwide, thereby saving resources for desirable female plants.

Assessment of the phytochemical profiles of novel hop (Humulus lupulus L.) cultivars: A potential route to beer crafting.

This study investigated the volatile phytochemical diversity of 30 samples obtained from experimental hybrid and commercial H. lupulus L. plants. Essential oils distilled from these samples were analysed by high resolution gas chromatography coupled with accurate mass time-of-flight mass spectrometry (GC-accTOFMS). A total of 58 secondary metabolites, mainly comprising 18 esters, 6 monoterpene hydrocarbons, 2 oxygenated monoterpenes, 20 sesquiterpene hydrocarbons, 7 oxygenated sesquiterpenes, and 4 ketones, were positively or tentatively identified. A total of 24 metabolites were detected in all samples, but commercial cultivars (selected for brewing performance) had fewer compounds identified compared to experimental genotypes. Chemometrics analyses enabled distinct differentiation of experimental hybrids from commercial cultivars, discussed in terms of the different classes of compounds present in different genotypes. Differences among the mono- and sesquiterpenoids, appear to be related to either: i) the genetic origin of the plants; or ii) the processes of bioaccumulation of the identified secondary metabolites.

Control of microbes on barley grains using peroxyacetic acid and electrolysed water as antimicrobial agents.

The extent and type of microbial growth on barley grain is a key determinant of malt quality for beer production, as problematic microbial products can persist into the brewing process and impact beer quality. Microbial composition on malting barley grain are influenced by field growth, storage and malting conditions. The present study investigated the efficacy of electrolysed water (EW) with free chlorine concentrations of 5, 50, 100 and 500 ppm, as well as peroxyacetic acid (PAA) at 100 and 500 ppm, as pre-steep treatments to control microbes on grains during the malting process. The research determined the reduction in the load of Pseudomonas spp., heterotrophic bacteria, yeasts and filamentous fungi on weathered and on non-weathered grains. Pseudomonas spp., heterotrophic bacteria and yeasts were significantly reduced up to 4 logs when treated with 500 ppm PAA. PAA reduced filamentous fungi but 500 ppm free chlorine EW showed greater reductions. None of the treatments had detrimental effect on grain germination. The variation in antimicrobial efficacy among treatments can be attributed to variations in microbial susceptibility as well as differences in anti-microbial mechanisms specific to each antimicrobial agent.

Sequential Hybrid Three-Dimensional Gas Chromatography with Accurate Mass Spectrometry: A Novel Tool for High-Resolution Characterization of Multicomponent Samples.

A novel sequential three-dimensional gas chromatography-high-resolution time-of-flight mass spectrometry (3D GC-accTOFMS) approach for profiling secondary metabolites in complex plant extracts is described. This integrated system incorporates a nonpolar first-dimension (1Dnp) separation step, prior to a microfluidic heart-cut (H/C) of a targeted region(s) to a cryogenic trapping device, directly followed by the rapid reinjection of a trapped solute into a polar second-dimension (2DPEG) column for multidimensional separation (GCnp-GCPEG). For additional separation, the effluent from 2DPEG can then be modulated according to a comprehensive 2D GC process (GC×GC), using an ionic liquid phase as a third-dimension (3DIL) column, to produce a sequential GCnp-GCPEG×GCIL separation. Thus, the unresolved or poorly resolved components, or regions that require further separation, can be precisely selected and rapidly transferred for additional separation on 2D or 3D columns, based on the greater separation realized by these steps. The described integrated system can be used in a number of modes, but one useful approach is to target specific classes of compounds for improved resolution. This is demonstrated through the separation and detection of the oxygenated sesquiterpenes in hop ( Humulus lupulus L.) essential oil and agarwood ( Aquilaria malaccensis) oleoresin. Improved resolution and peak capacity were illustrated through the progressive comparison of the tentatively identified components for GCnp-GCPEG and GCnp-GCPEG×GCIL methods. Relative standard deviations of intraday retentions (1 tR, 2 tR,, and 3 tR) and peak areas of ≤0.01, 0.07, 0.71, and 7.5% were achieved. This analytical approach comprising three GC column selectivities, hyphenated with high-resolution TOFMS detection, should be a valuable adjunct for the improved characterization of complex plant samples, particularly in the area of plant metabolomics.

Chemotyping of new hop (Humulus lupulus L.) genotypes using comprehensive two-dimensional gas chromatography with quadrupole accurate mass time-of-flight mass spectrometry.

Comprehensive two-dimensional gas chromatography with quadrupole accurate mass time-of-flight mass spectrometry (GC×GC-Q-TOFMS) is employed to profile Humulus lupulus L. (hop) essential oils. Comparison of characterised essential oils allows discrimination among chemotypes. Experimental and commercial hop genotypes displayed distinguishable chemotypic patterns among the volatile secondary metabolites making up their essential oils. In total, 210-306 unique compounds were detected (depending on specific genotype), with 99 of these compounds either positively or tentatively identified. Identified volatile secondary metabolites were grouped into esters, monoterpene hydrocarbons, oxygenated monoterpenes, sesquiterpene hydrocarbons, oxygenated sesquiterpenes and ketones. Terpenoids were the dominant chemical families across all hop genotypes analysed, representing between 67% and 90% of the total ion count. The multidimensional chromatographic profiles of hop essential oils are extremely information-rich, making GC×GC-Q-TOFMS useful for fast screening of new hybrid hop genotypes, and therefore informing breeding strategies to derive new commercial hop cultivars for the development of distinctive and desirable beers.

Parallel comprehensive two-dimensional gas chromatography.

We introduce an information rich analytical approach called parallel comprehensive two-dimensional gas chromatography (2GC×2GC). This parallel chromatography approach splits injected samples into two independent two-dimensional column ensembles and provides two GC×GC separations by using contra-directional thermal modulation. The first-dimension (1D) and second-dimension (2D) columns are connected using planar three-port microchannel devices, which are supplied with supplementary flow via two pressure controller modules. Precise carrier gas flow control at the junction of the 1D and 2D columns permits independent control of flow conditions in each separation column. The 2GC×2GC approach provides two entirely independent GC×GC separations for each injection. Analysis of hop (Humulus lupulus L.) essential oils is used to demonstrate the capability of the approach. The analytical performance of each GC×GC separation in the 2GC×2GC experiment is comparable to individual GC×GC separation with matching column configurations. The peak capacity of 2GC×2GC is about 2 times than that of single GC×GC system. The dual 2D chromatograms produced by this single detector system provide complementary separations and additional identification information by harnessing different selectivity provided by the four separation columns.

A new major-effect QTL for waterlogging tolerance in wild barley (H. spontaneum).

KEY MESSAGE: We report the first study on the unique allele from wild barley that can improve waterlogging tolerance in cultivated barley with a substantially higher contribution to aerenchyma formation. Waterlogging is one of the major abiotic stresses that dramatically reduce barley crop yield. Direct selection on waterlogging tolerance in the field is less effective due to its viability to environment. The most effective way of selection is to choose traits that make significant contributions to the overall tolerance and are easy to score. Aerenchyma formation under waterlogging stress is one of the most effective mechanisms to provide adequate oxygen supply and overcome stress-induced hypoxia imposed on plants. In this study, a new allele for aerenchyma formation was identified from a wild barley accession TAM407227 on chromosome 4H. Compared to that identified in cultivated barley, this allele not only produced a greater proportion of aerenchyma but made a greater contribution to the overall waterlogging tolerance. The QTL explained 76.8% of phenotypic variance in aerenchyma formation with a LOD value of 51.4. Markers co-segregating with the trait were identified and can be effectively used in marker assisted selection.

Meta-analysis of major QTL for abiotic stress tolerance in barley and implications for barley breeding.

MAIN CONCLUSION: We projected meta-QTL (MQTL) for drought, salinity, and waterlogging tolerance to the physical map of barley through meta-analysis. The positions of these MQTL were refined and candidate genes were identified. Drought, salinity and waterlogging are three major abiotic stresses limiting barley yield worldwide. Breeding for abiotic stress-tolerant crops has drawn increased attention, and a large number of quantitative trait loci (QTL) for drought, salinity, and waterlogging tolerance in barley have been detected. However, very few QTL have been successfully used in marker-assisted selection (MAS) in breeding. In this study, we summarized 632 QTL for drought, salinity and waterlogging tolerance in barley. Among all these QTL, only 195 major QTL were used to conduct meta-analysis to refine QTL positions for MAS. Meta-analysis was used to map the summarized major QTL for drought, salinity, and waterlogging tolerance from different mapping populations on the barley physical map. The positions of identified meta-QTL (MQTL) were used to search for candidate genes for drought, salinity, and waterlogging tolerance in barley. Both MQTL3H.4 and MQTL6H.2 control drought tolerance in barley. Fine-mapped QTL for salinity tolerance, HvNax4 and HvNax3, were validated on MQTL1H.4 and MQTL7H.2, respectively. MQTL2H.1 and MQTL5H.3 were also the target regions for improving salinity tolerance in barley. MQTL4H.4 is the main region controlling waterlogging tolerance in barley with fine-mapped QTL for aerenchyma formation under waterlogging conditions. Detected and refined MQTL and candidate genes are crucial for future successful MAS in barley breeding.

Identification of aerenchyma formation-related QTL in barley that can be effective in breeding for waterlogging tolerance.

KEY MESSAGE: Aerenchyma formation after 7 days of waterlogging in commercial potting mixture can be a reliable, fast, and widely utilized approach for the selection of waterlogging tolerant barley genotypes. One major QTL for aerenchyma formation after 7 days of waterlogging treatment was identified and the newly developed markers explained 44 % of the phenotypic variance. This QTL can now be effectively used in barley breeding programs. Waterlogging is one of the important limiting conditions for crop yield and productivity. The main feature of waterlogged soils is oxygen deprivation, due to slow gas diffusion in water. Decreased oxygen content in waterlogged soils leads to the oxygen deficiency in plant tissues, resulting in reduced energy availability for plants. Rapidly induced aerenchyma formation is critical to maintaining adequate oxygen supply and overall waterlogging tolerance in barley. In this study, we have proved that quantifying aerenchyma formation after 7 days of waterlogging in commercial potting mixture can be a reliable, fast, and widely utilised approach for the selection of waterlogging tolerant barley genotypes, which is supported by measurements of redox potential (an indicator of anaerobic conditions). This protocol was also used to identify quantitative trait loci (QTL) in a doubled haploid population of barley from the cross between Yerong (tolerant) and Franklin (sensitive) genotypes. The QTL for aerenchyma formation and root porosity were at the same location as the waterlogging tolerance QTL. Seven new markers were developed and added onto this region on chromosome 4H. One major QTL for aerenchyma formation after 7 days waterlogging treatment explained 44.0 % of the phenotypic variance. This successful QTL for aerenchyma formation can be effectively used in the marker assisted selection to improve waterlogging tolerance in barley.

Environmental adaptation in stomatal size independent of the effects of genome size.

Cell sizes are linked across multiple tissues, including stomata, and this variation is closely correlated with genome size. These associations raise the question of whether generic changes in cell size cause suboptimal changes in stomata, requiring subsequent evolution under selection for stomatal size. We tested the relationships among guard cell length, genome size and vegetation type using phylogenetically independent analyses on 67 species of the ecologically and structurally diverse family, Proteaceae. We also compared how genome and stomatal sizes varied at ancient (among genera) and more recent (within genus) levels. The observed 60-fold range in genome size in Proteaceae largely reflected the mean chromosome size. Compared with variation among genera, genome size varied much less within genera (< 6% of total variance) than stomatal size, implying evolution in stomatal size subsequent to changes in genome size. Open vegetation and closed forest had significantly different relationships between stomatal and genome sizes. Ancient changes in genome size clearly influenced stomatal size in Proteaceae, but adaptation to habitat strongly modified the genome-stomatal size relationship. Direct adaptation to the environment in stomatal size argues that new proxies for past concentrations of atmospheric CO2 that incorporate stomatal size are superior to older models based solely on stomatal frequency.

Quantitative genetic parameters for yield, plant growth and cone chemical traits in hop (Humulus lupulus L.).

BACKGROUND: Most traits targeted in the genetic improvement of hop are quantitative in nature. Improvement based on selection of these traits requires a comprehensive understanding of their inheritance. This study estimated quantitative genetic parameters for 20 traits related to three key objectives for the genetic improvement of hop: cone chemistry, cone yield and agronomic characteristics. RESULTS: Significant heritable genetic variation was identified for α-acid and ß-acid, as well as their components and relative proportions. Estimates of narrow-sense heritability for these traits (h2 = 0.15 to 0.29) were lower than those reported in previous hop studies, but were based on a broader suite of families (108 from European, North American and hybrid origins). Narrow-sense heritabilities are reported for hop growth traits for the first time (h2 = 0.04 to 0.20), relating to important agronomic characteristics such as emergence, height and lateral morphology. Cone chemistry and growth traits were significantly genetically correlated, such that families with more vigorous vegetative growth were associated with lower α-acid and ß-acid levels. This trend may reflect the underlying population structure of founder genotypes (European and North American origins) as well as past selection in the Australian environment. Although male and female hop plants are thought to be indistinguishable until flowering, sex was found to influence variation in many growth traits, with male and female plants displaying differences in vegetative morphology from emergence to cone maturity. CONCLUSIONS: This study reveals important insights into the genetic control of quantitative hop traits. The information gained will provide hop breeders with a greater understanding of the additive genetic factors which affect selection of cone chemistry, yield and agronomic characteristics in hop, aiding in the future development of improved cultivars.

Comparison of Thraustochytrids Aurantiochytrium sp., Schizochytrium sp., Thraustochytrium sp., and Ulkenia sp. for production of biodiesel, long-chain omega-3 oils, and exopolysaccharide.

Heterotrophic growth of thraustochytrids has potential in coproducing biodiesel for transportation, as well as producing a feedstock for omega-3 long-chain (≥C20) polyunsaturated fatty acids (LC-PUFA), especially docosahexaenoic acid (DHA) for use in nutraceuticals. In this study, we compared eight new endemic Australian thraustochytrid strains from the genera Aurantiochytrium, Schizochytrium, Thraustochytrium, and Ulkenia for the synthesis of exopolysaccharide (EPS), in addition to biodiesel and LC-PUFA. Aurantiochytrium sp. strains readily utilized glucose for biomass production, and increasing glucose from 2 to 4 % w/v of the culture medium resulted in increased biomass yield by an average factor of 1.7. Ulkenia sp. strain TC 010 and Thraustochytrium sp. strain TC 033 did not utilize glucose, while Schizochytrium sp. strain TC 002 utilized less than half the glucose available by day 14, and Thraustochytrium sp. strain TC 004 utilized glucose at 4 % w/v but not 2 % w/v of the culture suggesting a threshold requirement between these values. Across all strains, increasing glucose from 2 to 4 % w/v of the culture medium resulted in increased total fatty acid methyl ester content by an average factor of 1.9. Despite an increasing literature demonstrating the capacity of thraustochytrids for DHA synthesis, the production of EPS from these organisms is not well documented. A broad range of EPS yields was observed. The maximum yield of EPS was observed for Schizochytrium sp. strain TC 002 (299 mg/L). High biomass-producing strains that also have high lipid and high EPS yield may be better candidates for commercial production of biofuels and other coproducts.

High cell density cultivation of a novel Aurantiochytrium sp. strain TC 20 in a fed-batch system using glycerol to produce feedstock for biodiesel and omega-3 oils.

A recently isolated Australian Aurantiochytrium sp. strain TC 20 was investigated using small-scale (2 L) bioreactors for the potential of co-producing biodiesel and high-value omega-3 long-chain polyunsaturated fatty acids. Higher initial glucose concentration (100 g/L compared to 40 g/L) did not result in markedly different biomass (48 g/L) or fatty acid (12-14 g/L) yields by 69 h. This comparison suggests factors other than carbon source were limiting biomass production. The effect of both glucose and glycerol as carbon sources for Aurantiochytrium sp. strain TC 20 was evaluated in a fed-batch process. Both glucose and glycerol resulted in similar biomass yields (57 and 56 g/L, respectively) by 69 h. The agro-industrial waste from biodiesel production-glycerol-is a suitable carbon source for Aurantiochytrium sp. strain TC 20. Approximately half the fatty acids from Aurantiochytrium sp. strain TC 20 are suitable for development of sustainable, low emission sources of transportation fuels and bioproducts. To further improve biomass and oil production, fortification of the feed with additional nutrients (nitrogen sources, trace metals and vitamins) improved the biomass yield from 56 g/L (34 % total fatty acids) to 71 g/L (52 % total fatty acids, cell dry weight) at 69 h; these yields are to our knowledge around 70 % of the biomass yields achieved, however, in less than half of the time by other researchers using glycerol and markedly greater than achieved using other industrial wastes. The fast growth and suitable fatty acid profile of this newly isolated Aurantiochytrium sp. strain TC 20 highlights the potential of co-producing the drop-in biodiesel and high value omega-3 oils.

Quantitative trait loci in hop (Humulus lupulus L.) reveal complex genetic architecture underlying variation in sex, yield and cone chemistry.

BACKGROUND: Hop (Humulus lupulus L.) is cultivated for its cones, the secondary metabolites of which contribute bitterness, flavour and aroma to beer. Molecular breeding methods, such as marker assisted selection (MAS), have great potential for improving the efficiency of hop breeding. The success of MAS is reliant on the identification of reliable marker-trait associations. This study used quantitative trait loci (QTL) analysis to identify marker-trait associations for hop, focusing on traits related to expediting plant sex identification, increasing yield capacity and improving bittering, flavour and aroma chemistry. RESULTS: QTL analysis was performed on two new linkage maps incorporating transferable Diversity Arrays Technology (DArT) markers. Sixty-three QTL were identified, influencing 36 of the 50 traits examined. A putative sex-linked marker was validated in a different pedigree, confirming the potential of this marker as a screening tool in hop breeding programs. An ontogenetically stable QTL was identified for the yield trait dry cone weight; and a QTL was identified for essential oil content, which verified the genetic basis for variation in secondary metabolite accumulation in hop cones. A total of 60 QTL were identified for 33 secondary metabolite traits. Of these, 51 were pleiotropic/linked, affecting a substantial number of secondary metabolites; nine were specific to individual secondary metabolites. CONCLUSIONS: Pleiotropy and linkage, found for the first time to influence multiple hop secondary metabolites, have important implications for molecular selection methods. The selection of particular secondary metabolite profiles using pleiotropic/linked QTL will be challenging because of the difficulty of selecting for specific traits without adversely changing others. QTL specific to individual secondary metabolites, however, offer unequalled value to selection programs. In addition to their potential for selection, the QTL identified in this study advance our understanding of the genetic control of traits of current economic and breeding significance in hop and demonstrate the complex genetic architecture underlying variation in these traits. The linkage information obtained in this study, based on transferable markers, can be used to facilitate the validation of QTL, crucial to the success of MAS.

TRFLP analysis reveals that fungi rather than bacteria are associated with premature yeast flocculation in brewing.

Premature yeast flocculation (PYF) is a sporadic fermentation problem in the brewing industry that results in incomplete yeast utilization of fermentable sugars in wort. Culture-independent, PCR-based fingerprinting techniques were applied in this study to identify the associations between the occurrence of the PYF problem during brewery fermentation with barley malt-associated microbial communities (both bacteria and fungi). Striking differences in the microbial DNA fingerprint patterns for fungi between PYF positive (PYF +ve) and negative (PYF -ve) barley malts were observed using the terminal restriction fragment length polymorphism (TRFLP) technique. The presence of terminal restriction fragments (TRFs) of 360-460 bp size range, for fungal HaeIII restriction enzyme-derived TRFLP profiles appeared to vary substantially between PYF +ve and PYF -ve samples. The source of the barley malt did not influence the fungal taxa implicated in PYF. TRFLP analysis indicates bacterial taxa are unlikely to be important in causing PYF. Virtual digestion of fungal sequences tentatively linked HaeIII TRFs in the 360-460 bp size range to a diverse range of yeast/yeast-like species. Findings from this study suggest that direct monitoring of barley malt samples using molecular methods could potentially be an efficient and viable alternative for monitoring PYF during brewery fermentations.

Biodiscovery of new Australian thraustochytrids for production of biodiesel and long-chain omega-3 oils.

Heterotrophic growth of thraustochytrids has potential in co-producing a feedstock for biodiesel and long-chain (LC, ≥C(20)) omega-3 oils. Biodiscovery of thraustochytrids from Tasmania (temperate) and Queensland (tropical), Australia, covered a biogeographic range of habitats including fresh, brackish, and marine waters. A total of 36 thraustochytrid strains were isolated and separated into eight chemotaxonomic groups (A-H) based on fatty acid (FA) and sterol composition which clustered closely with four different genera obtained by 18S rDNA molecular identification. Differences in the relative proportions (%FA) of long-chain C(20), C(22), omega-3, and omega-6 polyunsaturated fatty acids (PUFA), including docosahexaenoic acid (DHA), docosapentaenoic acid, arachidonic acid, eicosapentaenoic acid (EPA), and saturated FA, as well as the presence of odd-chain PUFA (OC-PUFA) were the major factors influencing the separation of these groups. OC-PUFA were detected in temperate strains of groups A, B, and C (Schizochytrium and Thraustochytrium). Group D (Ulkenia) had high omega-3 LC-PUFA (53% total fatty acids (TFA)) and EPA up to 11.2% TFA. Strains from groups E and F (Aurantiochytrium) contained DHA levels of 50-61% TFA after 7 days of growth in basal medium at 20 °C. Groups G and H (Aurantiochytrium) strains had high levels of 15:0 (20-30% TFA) and the sum of saturated FA was in the range of 32-51%. ß,ß-Carotene, canthaxanthin, and astaxanthin were identified in selected strains. Phylogenetic and chemotaxonomic groupings demonstrated similar patterns for the majority of strains. Our results demonstrate the potential of these new Australian thraustochytrids for the production of biodiesel in addition to omega-3 LC-PUFA-rich oils.

Odd-chain polyunsaturated fatty acids in thraustochytrids.

A series of unusual odd-chain fatty acids (OC-FA) were identified in two thraustochytrid strains, TC 01 and TC 04, isolated from waters off the south east coast of Tasmania, Australia. FA compositions were determined by capillary GC and GC-MS, with confirmation of polyunsaturated fatty acids (PUFA) structure performed by analysis of 4,4-dimethyloxazoline derivatives. PUFA constituted 68-74% of the total FA, with the essential PUFA; eicosapentaenoic acid (20:5ω3, EPA), arachidonic acid (20:4ω6, AA) and docosahexaenoic acid (22:6ω3, DHA), accounting for 42-44% of the total FA. High proportions of the saturated OC-FA 15:0 (7.1% in TC 01) and 17:0 (6.2% in TC 04) were detected. The OC-FA 17:1ω8 was present at 2.8% in TC 01. Of particular interest, the C21 PUFA 21:5ω5 and 21:4ω7 were detected at 3.5% and 4.1%, respectively, in TC 04. A proposed biosynthesis pathway for these OC-PUFA is presented. It is possible that the unsaturated OC-PUFA found previously in a number of marine animals were derived from dietary thraustochytrids and they could be useful biomarkers in environmental and food web studies.

Varietal characterization of hop (Humulus lupulus L.) by GC-MS analysis of hop cone extracts.

An approach is described for use in the varietal characterization of hop (Humulus lupulus L.) varieties. The study focuses on commercial hop varieties and was timed to coincide with the 2008 commercial hop harvest in Tasmania, Australia. Analysis of hop extracts was performed using GC-MS. A 60 m capillary column was employed to increase efficiency to permit the use of a quadrupole mass spectrometer in place of a time of flight mass spectrometer that is more commonly used for this type of analysis. A set of characterization functions were derived from discriminant analysis which were highly suitable for varietal characterization of the eight commercial varieties included in the study, namely Willamette, Victoria, Pride of Ringwood, Cascade, Southern Hallertau, Millennium, Southern Saaz, and Super Pride.

DNA sequence and expression variation of hop (Humulus lupulus) valerophenone synthase (VPS), a key gene in bitter acid biosynthesis.

BACKGROUND: The hop plant (Humulus lupulus) is a source of many secondary metabolites, with bitter acids essential in the beer brewing industry and others having potential applications for human health. This study investigated variation in DNA sequence and gene expression of valerophenone synthase (VPS), a key gene in the bitter acid biosynthesis pathway of hop. METHODS: Sequence variation was studied in 12 varieties, and expression was analysed in four of the 12 varieties in a series across the development of the hop cone. RESULTS: Nine single nucleotide polymorphisms (SNPs) were detected in VPS, seven of which were synonymous. The two non-synonymous polymorphisms did not appear to be related to typical bitter acid profiles of the varieties studied. However, real-time quantitative reverse-transcription polymerase chain reaction (qRT-PCR) analysis of VPS expression during hop cone development showed a clear link with the bitter acid content. The highest levels of VPS expression were observed in two triploid varieties, 'Symphony' and 'Ember', which typically have high bitter acid levels. CONCLUSIONS: In all hop varieties studied, VPS expression was lowest in the leaves and an increase in expression was consistently observed during the early stages of cone development.

Red to far-red ratio correction in plant growth chambers - growth responses and influence of thermal load on garden pea.

Plant growth chambers are commonly used to minimize environmental variation but the light sources used vary considerably from natural light and from each other. Incandescent globes are often used to add more far-red light, with the aim of producing a more natural red to far-red ratio (R:FR), but also add to thermal load. High-intensity discharge lamps are often used to produce higher irradiances, more akin to natural light, but the thermal implications are rarely considered because air temperature is controlled. This paper examines the spectral properties and thermal implications of growth chamber light sources and takes a whole-plant physiology approach, by examining growth responses of a photoperiodic pea line (Pisum sativum L. cv. Torsdag) in the same growth chamber type under different light sources - in essence using plants to study the controlled environments rather than vice-versa. High R:FR delayed flowering and inhibited internode extension in pea. However, the addition of far-red-rich incandescent globes in the proportions provided in the growth chambers (400-500 W) did little to reduce R:FR, did not induce earlier flowering and actually further inhibited internode length. Leaflet size and yield were significantly reduced. While air temperature was maintained at 20 degrees C in all experiments, radiant temperature was significantly higher under high irradiance and/or with incandescent added, and soil temperatures were elevated. Growth responses under these lights were similar to the effect caused by elevating the air temperature. An alternative method of controlling R:FR, without thermal load implications, using light-emitting diodes is described.